Your current location:Home >>Product Center >>Carbon molecular sieve

                Carbon molecular sieve

                Hits:799  Time:2019-12-03    

                產品介紹.jpg


                       Carbon molecular sieves (CMS) is a new type of adsorbent developed in the 1970s. It is a kind of excellent non-polar carbon material. CMS is used to separate and enrich nitrogen from air and adopt the process of nitrogen production at room temperature and low pressure. Compared with the traditional deep cold and high pressure nitrogen production process, CMS has the advantages of low investment cost, fast nitrogen production speed and low nitrogen cost. Therefore, it is currently a pressure swing adsorption (p.s.a) air separation nitrogen rich adsorbent selected by the engineering community, which is widely used in chemical industry, oil and gas industry, electronic industry, food industry, coal industry, pharmaceutical industry, cable industry, metal heat treatment, transportation and storage.

                功能特點.jpg   


                      A unique single pore (mono-disperse porous microstructure) can be obtained, which will not expand after moisture absorption. The chemical component of molecular sieve is crysta Lline alumina-silica tes, which is synthesized through a special chemical mechanism. Do not change into solution, still adhere to the dry state. The utility model has the advantages of convenient use, round appearance and beautiful shape. The pore size is similar to that of gas molecules.

                     ● potassium, sodium or calcium atoms contained in aluminosilicate, followed by. It can produce very strong ionic force to polar molecules, so it can make molecular sieves play a very strong moisture absorption capacity under low humidity, and reach almost absolute dry level. At the same time, molecular sieves can also have strong adsorption on other kinds of polar molecules, such as (CO2 H2S co NH3 olefin PA RA fin) and so on.

                     

                技術參數.jpg


                Model

                Type

                Adsorption pressure

                                   MPa

                Nitrogen concentration

                                      N2%

                Nitrogen production

                                  NM3/h.t

                N2/Air
                %

                CMS-185

                0.8

                99.99

                60

                20

                99.9

                120

                26

                99.5

                185

                36

                99.0

                230

                41

                98.0

                310

                46

                CMS-200

                0.8

                99.99

                70

                21

                99.9

                140

                27

                99.5

                200

                36

                99.0

                260

                41

                98.0

                330

                48

                CMS-220

                0.8

                99.99

                90

                25

                99.9

                160

                34

                99.5

                220

                43

                99.0

                290

                48

                98.0

                360

                54

                包裝方案.jpg

                分子篩包裝.jpg

                Pre page: 無

                Next page:無

                五月婷婷开心深深爱