Your current location:Home >>Product Center >>High flow ring

                High flow ring

                Hits:786  Time:2020-01-16    

                產品介紹.jpg

                Plastic high-flow ring packing is a gridded open-hole tower packing developed on the basis of the pall ring structure. The open-hole rate of high-flow ring packing is more than 50%, and the bed voids are higher than those of the same specification pall ring. Therefore, high-flow ring packing of polypropylene has higher fluid flux. The pressure drop per meter of polypropylene high flow ring packing is 45% lower than that of pall ring. Polypropylene high flow ring packing due to the vertical frame section up and down staggered arrangement, the central ring with reinforcement, rigidity and strength is better. It is characterized by high production capacity, low pressure and suitable separation of heat sensitive materials. 


                功能特點.jpg

                ● high flow ring is the third generation of high efficiency filler, which can maintain high mechanical stability, porosity and mass transfer effect. When more efficient packing is required, the high flow ring is due to its open structure and design. More gas or liquid can be processed without sacrificing mass transfer.


                技術參數.jpg

                namePlastic high flow ring
                materialPP,PE,PVC,CPVC,PVDF ,etc
                life>3 years
                sizeareaVoidweight
                mmm2/m3%Kg/m3
                162609180
                252109279
                381409458
                501009454
                90739633
                manceHigh voidage, low pressure, low height of mass transfer unit, high flooding point, sufficient gas-liquid contact, small specific gravity, high mass transfer efficiency

                advant

                ages

                1. The special structure makes it have large circulation, low pressure and good mechanical strength.
                2. Strong corrosion resistance, large void ratio, energy saving and environmental protection, low cost, light specific gravity easy loading and unloading.

                Appli

                cation field

                Plastic bulk packing is widely used in petroleum, chemical industry, chlor-alkali, gas, environmental protection and other industries.


                理化性能.jpg

                Properties

                materials

                PEPPRPPPVCCPVCPVDF
                Density0.980.961.21.71.81.8
                Operating90>100>120>60>90>150
                resistanceGOODGOODGOODGOODGOODGOOD
                strength>6.0>6.0>6.0>6.0>6.0>6.0

                包裝方案.jpg

                塑料散堆填料包裝.jpg


                Pre page: 無

                Next page:無

                五月婷婷开心深深爱