Your current location:Home >>Product Center >>Plastic snowflake ring

                Plastic snowflake ring

                Hits:855  Time:2020-01-16    

                產品介紹.jpg

                Plastic snow ring is made of polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene fluoride (PVDF) and other tower packing. It has the characteristics of high void fraction, low pressure drop, low mass transfer unit height, high flooding point, full gas-liquid contact, small specific gravity, and high heat and mass transfer efficiency. These plastic bulk fillers operate at temperatures ranging from 60 to 150 degrees Celsius. Widely used in petroleum, chemical, chlor-alkali, gas, environmental protection and other industries of the packed tower.


                功能特點.jpg

                ● applicable to petroleum, chemical, chlor-alkali, gas, smelting, environmental protection, electric power and other enterprises. Various horizontal acid storage tank plastic snowflake ring, packing, water treatment in the condensate storage tank and desalination tank, greatly reduce the acid fog, air carbon dioxide and oxygen pollution to water quality.

                ● snowflake ring packing has the characteristics of large void, heat resistance, chemical corrosion resistance, low pressure drop and mass transfer unit height, high flooding point, full gas-liquid contact, small specific gravity, high mass transfer efficiency.


                技術參數.jpg

                name
                Plastic snowflake ring
                materialPP,PE,PVC,CPVC,PVDF ,etc
                life>3 years
                sizem2/m3Voidnumberper/ m3weightKg/m3Dry packing
                mm%m-1
                9013897500045142

                perfor

                mance

                High voidage, low pressure, low height of mass transfer unit, high flooding point, sufficient gas-liquid contact, small specific gravity, high mass transfer efficiency

                advan

                tages

                1. The special structure makes it have large circulation, low pressure and good mechanical strength.

                2. Strong corrosion resistance, large void ratio, energy saving and environmental protection, low cost, light specific gravity easy loading and unloading.

                Appli

                cation field

                Plastic bulk packing is widely used in petroleum, chemical industry, chlor-alkali, gas, environmental protection and other industries.
                Density0.980.961.21.71.81.8
                Operating90>100>120>60>90>150

                decay

                resistance

                GOODGOODGOODGOODGOODGOOD

                compre

                ssive 

                strength

                >6.0>6.0>6.0>6.0>6.0>6.0

                包裝方案.jpg

                塑料散堆填料包裝.jpg


                Pre page: 無

                Next page:無

                五月婷婷开心深深爱